Introduction: Ethernet Crossover Cable From a Straight-through Ethernet Cable
Make an ethernet crossover cable from a straight-through ethernet cable
Step 1: Things You Will Need
- Ethernet cable
- Soldering iron
- Solder
shrinkable tubing
cable cutting plier
Tape
Step 2: Remove a Small part of the Tubing
Remove a small part of the tubing
Step 3: Soldering the Cable
- Cut the green, orange, striped green and striped orange wires
- Remove end ef the tubing of the wires
- Solder the wires as shown on the schematic
Step 4: Finishing the Cable
Put the wires inside the tubing and tape it together