Diffused LED - Green 10mm

Check out these big 10mm through-hole LEDs! The opaque epoxy package causes these LEDs to have a soft, diffuse glow.

  • 520-525nm Green
  • 3.0-3.4VDC Forward Voltage
  • 20mA Forward Current
  • 40 degree viewing angle
  • 150-180 MCD output
  • [Datasheet](http://cdn.sparkfun.com/datasheets/Components/LED/10mm green LED YSL-R1047G5D-D2-1.pdf)
  • LED Tutorial

Diffused LED - Green 10mm Product Help and Resources

Core Skill: Electrical Prototyping

If it requires power, you need to know how much, what all the pins do, and how to hook it up. You may need to reference datasheets, schematics, and know the ins and outs of electronics.

2 Electrical Prototyping

Skill Level: Rookie - You may be required to know a bit more about the component, such as orientation, or how to hook it up, in addition to power requirements. You will need to understand polarized components.
See all skill levels


Comments

Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • cjbaar / about 11 years ago / 1

    These are really poor quality LEDs. I have had about 1/4 of the leads break off before I could even get them situated into a project.

  • If I had a 100-330uF capacitor charge through a 1k resistor, would this get biased in the correct direction at the ~3v mark and allow the cap to discharge? Like an LED flasher?

Customer Reviews

No reviews yet.